Eaton Gen 1 (AutoShift) Fault Code: 83 PID: SID 18 FMI: 14 Shift Lever Missing

Overview:
This code indicates the Eaton or OEM Shift Lever is not sensing any lever positions.

Detection:
Starting at key-on and throughout operation, the System Manager constantly measures the feedback from the Shift Lever circuit. If the Shift Lever reports no lever positions are sensed, the fault code is set. To allow the System Manager to detect this fault, it is necessary to turn the key on since it constantly monitors for this failure mode.

Fallback
This fault causes a downshift only fallback and shifts to neutral when the vehicle stops.

Required Tools:
1) Basic Hand Tools
2) AutoSelect/AutoShift Troubleshooting Guide

Possible Causes:
1) Lever placed between positions