Detroit DD13 EPA10 (2010-13) Fault Code: SPN 636 FMI 2 (MCM) No Match of Camshaft and Crankshaft Signals

DESCRIPTION:
This code will set when there is a camshaft and crankshaft mismatch signal.

MONITORED PARAMETER:
Camshaft/crankshaft sensors.

TYPICAL ENABLING CONDITIONS:
Engine idle

MONITOR SEQUENCE:
None

EXECUTION FREQUENCY:
Continuous when enabling conditions met.

TYPICAL DURATION:
10 seconds

DASH LAMPS:
1. MIL
2. CEL

ENGINE REACTION:
None

VERIFICATION:
Engine idle: One minute.

NOTE: If code 723-3, 723-4, 636-3, or 636-4 active fix those first.

PROBABLE CAUSES:
1. Verify proper camshaft timing and gear lash adjustment.
2. Camshaft position sensor failure.
3. Camshaft position sensor harness/connector.