PACCAR MX (2004 Emissions) Fault Code: P1336 Crankshaft Speed Signal – Out of Range During Engine Start

PACCAR MX (2004 Emissions) Fault Code: P1336 Crankshaft Speed Signal – Out of Range During Engine Start

SET CONDITIONS:
The PCI ECU (D420) detects a high frequency disturbance on the crankshaft signal.

DIAGNOSTIC CONDITION:
This diagnostic runs continuously when the engine is started.

CORRESPONDING OBD READINESS MONITOR:
None

RESET CONDITION:
This DTC changes to inactive when the fault is no longer detected.

REPAIR VERIFICATION:
1. Clear all DTCs.
2. Test drive or operate the vehicle to meet the diagnostic conditions and set conditions.
3. Did the DTC come back?
– No, repair successful
– Yes, repair unsuccessful

POSSIBLE CAUSES:
1. Faulty crankshaft sensor signal
2. Damaged flywheel
3. Faulty crankshaft sensor

ADDITIONAL INFORMATION:
1. Crankshaft sensor (F552) is used to determine the crankshaft speed and position. It is possible for the camshaft sensor (F558) to be used as backup to run the engine.
2. Engine torque is reduced.